Radon Levels in Alabama
Alabama is classified as an EPA Zone 3 state with a low risk for radon. Average indoor radon levels range from 0.4 to 2 pCi/L, and approximately 4% of Alabama homes test above the EPA action level of 4.0 pCi/L.
Alabama Radon Summary
Key Facts About Radon in Alabama
- Most of Alabama is EPA Zone 3 (low risk)
- Northern counties near the Appalachian foothills may have slightly higher levels
- Still recommended to test — even low-risk states have individual homes above action level
Alabama Testing Requirements & Recommendations
No statewide testing mandate, but recommended for all homes by EPA.
Mitigation systems in Alabama typically cost $800–$1,500 installed.
Major Cities in Alabama
Radon levels can vary significantly within Alabama depending on local geology. All residents — regardless of city — should test their specific home, as neighborhood-level radon varies independently of broader state and county averages.
What Should Alabama Residents Do?
Test Your Home
Use a short-term charcoal test kit ($15–$25) for an initial reading, or a continuous radon detector for ongoing monitoring. Test in your basement or lowest livable area.
Understand Your Result
If your result is below 2.0 pCi/L: monitor periodically. Between 2.0–4.0 pCi/L: consider mitigation. Above 4.0 pCi/L: the EPA recommends mitigation. Above 8.0 pCi/L: take action promptly.
Hire a Certified Contractor if Needed
Look for NRPP or NRSB-certified radon mitigation contractors in Alabama. Mitigation systems typically cost $800–$2,500 and can reduce radon levels by 50–99%.
Verify with a Follow-Up Test
After mitigation, test again to confirm the system is working. Retest every 2 years, or after significant home renovations.
Some links are affiliate links. Learn more.
