Radon Levels in New Mexico
New Mexico is classified as an EPA Zone 2 state with a moderate risk for radon. Average indoor radon levels range from 1 to 4.5 pCi/L, and approximately 14% of New Mexico homes test above the EPA action level of 4.0 pCi/L.
New Mexico Radon Summary
Key Facts About Radon in New Mexico
- New Mexico's uranium mining history affects soil radon levels in some regions
- Mountainous northern areas have higher levels
- NMED provides radon testing resources for residents
New Mexico Testing Requirements & Recommendations
No mandate. NMED recommends testing for all NM homes.
New Mexico's arid conditions make sub-slab depressurization effective.
Major Cities in New Mexico
Radon levels can vary significantly within New Mexico depending on local geology. All residents — regardless of city — should test their specific home, as neighborhood-level radon varies independently of broader state and county averages.
What Should New Mexico Residents Do?
Test Your Home
Use a short-term charcoal test kit ($15–$25) for an initial reading, or a continuous radon detector for ongoing monitoring. Test in your basement or lowest livable area.
Understand Your Result
If your result is below 2.0 pCi/L: monitor periodically. Between 2.0–4.0 pCi/L: consider mitigation. Above 4.0 pCi/L: the EPA recommends mitigation. Above 8.0 pCi/L: take action promptly.
Hire a Certified Contractor if Needed
Look for NRPP or NRSB-certified radon mitigation contractors in New Mexico. Mitigation systems typically cost $800–$2,500 and can reduce radon levels by 50–99%.
Verify with a Follow-Up Test
After mitigation, test again to confirm the system is working. Retest every 2 years, or after significant home renovations.
Some links are affiliate links. Learn more.
